Mobility Print App - One-Time Setup to Print from Mobile and Personal Devices

With Mobility Print your mobile devices and personal computers can print to a UWSP FollowMe printer just like printing from a UWSP computer.

Your personal device must be connected to UWSPWIRELESS or EDUROAM on the UWSP wireless network with a UWSP account.

To print using Mobility Print see App Set Up Instructions below for a one-time set up on your device.

 

Mobility Print App Set Up Instructions for:

-> Add the FollowMe print queues if prompted during set up:

  • UWSPFollowMe-BW (black and white)

  • ​UWSPFollowMe-CL (color)

  • ​Mac OS:  Mac OS devices do not require an app to be installed but you must add the FollowMe print queues. See the instructions below.

  • ​ iOS devices: iOS devices do not require an app to be installed. Your device will identify and display the FollowMe print queues whenever you are on campus.

 

Mac OS: Add FollowMe Print Queues

► MacOS (Ventura & after)

  1. Open System Settings.
  2. Select Printers & Scanners at the lower-left.
  3. Click the “+” button (bottom left Printers list).
  4. Select UWSPFollowMe-BW.
  5. Make sure the Use field is set to Secure AirPrint.
  6. Click Add.

Repeat these steps to add UWSPFollowMe-CL,​ the color FollowMe printer.

 

► MacOS (Sierra-Monterey)

  1. Open System Settings.
  2. Select Printers & Scanners at the lower-left.
  3. Click the “+” button.
  4. Select UWSPFollowMe-BW.
  5. Make sure the Use field is set to SecureAirPrint.
  6. Click Add.

Repeat these steps to add UWSPFollowMe-CL,​ the color FollowMe printer.

 

►Older MacOS

On older OS X, the printers and drivers must be manually installed prior to use.

  1. Open System Settings.
  2. Select Printers & Scanners at the lower-left.
  3. Click the “+” button (bottom left Printers list).
  4. Select PRINT2-UWSPFollowMe-BW.
  5. Click Select Software… in the Use: field.
  6. Select RICOH MP C4504ex PS.
  7. Click OK to apply the driver.
  8. Click Add.
  9. Close the Add window.
  10. Select the PRINT2-UWSPFollowMe-BW printer.
  11. Click Options & Supplies.
  12. Select the Options tab.
  13. Under Finisher, select Finisher SR3210.
  14. Click OK.

Repeat the steps to add UWSPFollowMe-CL,​ the color FollowMe printer.

 

Contact the IT Service Desk with additional questions!

Print Article